Products
RC series U-groove colorful aluminum milling cutter
Economical and efficient colorful aluminum knife
Product Characteristics:It is economical, efficient, rough and fine, and adopts DLC coating. It is suitable for high-speed and efficient cutting of aluminum alloy, magnesium alloy, plastic,acrylic and other non-ferrous metals.
Product Details
Large front angle designThe large front angle specially designed for aluminum alloy makes the cutting sharp and greatly improves the finish of the processing surface
The blade tip is treated with tip protectionEnsure the situation of the blade tip and improve the sharpness resistance of the blade tip.
Spiral groove to do special polishing treatmentThe smooth chip groove allows the aluminum chips to be discharged quickly and prevents the aluminum chips from being blocked
|
DLC coating friction coefficient is small, aluminum metal is not easy to depositUsing DLC (diamond-like carbon) coating technology with high hardness, low friction coefficient, wear resistance and other characteristics, Can be aluminum alloy dry processing, processing is not easy to produce accreting tumor
High surface finishTool cutting edge to do special treatment, combined with DLC coating, can achieve high finish surface processing
Good chip removal effect and high processing efficiencyThrough the DLC coating with low friction coefficient and low core thickness value, high torque, large inclination angle, cutting edge setting turning point for cutting discharge, the cutting adhesion is less, the discharge performance is superior, and high efficiency processing can be realized.
|
Product Model
| Blade diameter (d) | Blade length (I) | Shank diameter (D) | Total length (I) | Blade number (F) |
| 1 | 3 | 4 | 50 | 3 |
| 1.5 | 4.5 | 4 | 50 | 3 |
| 2 | 6 | 4 | 50 | 3 |
| 2.5 | 7.5 | 4 | 50 | 3 |
| 3 | 9 | 4 | 50 | 3 |
| 4 | 12 | 4 | 50 | 3 |
| 4 | 15 | 4 | 75 | 3 |
| 4 | 20 | 4 | 100 | 3 |
| 6 | 18 | 6 | 50 | 3 |
| 6 | 25 | 6 | 75 | 3 |
| 6 | 30 | 6 | 100 | 3 |
| 8 | 24 | 8 | 60 | 3 |
| 8 | 30 | 8 | 75 | 3 |
| 8 | 35 | 8 | 100 | 3 |
| 10 | 30 | 10 | 75 | 3 |
| 10 | 40 | 10 | 100 | 3 |
| 12 | 36 | 12 | 75 | 3 |
| 12 | 45 | 12 | 100 | 3 |
| 14 | 45 | 14 | 100 | 3 |
| 16 | 45 | 16 | 100 | 3 |
| 18 | 45 | 18 | 100 | 3 |
| 20 | 45 | 20 | 100 | 3 |
Support non-standard specification customization
Machining Case 1 (Dynamic milling)
| Using tools | RC-D6*18*D6*50L*3F |
| Processing materials | A6061 |
| Processing mode | Dynamic milling |
| Cutting speed | 339 m/min(18000min-1) |
| Feed speed | 3500mm/min(0.065mm/Fz) |
| Cutting depth | Ap=10mm Ae=2mm |
| Cooling mode | Emulsion |
| Use of machine tools | Vertical machining center (HSK50A) |
Keywords： RC series U-groove colorful aluminum milling cutter
Online Message
Contact Information
Tel: +86-18861298766
E-mail: jeni@vellfire-tools.com
E-mail: amy@vellfire-tools.com
Whatsapp：8618861298766
Address: No. 156, Nanxi Road, Xinbei District, Changzhou City (Wilfa Recutting Milling Cutter and High Efficiency Drill Wholesale)
Copyright© 2023 Jiangsu Vellfire Precision Alloy Co., Ltd. All Rights Reserved